Wednesday 17 August 2011

low impact draw unit

The next design i am featuring in this blog is the 'low impact draw unit' one of the first designs i made for my many portfolio sites. The idea for this came literaly out of the blue-which is rare for me- while i was trying to think of innovative draw designs. the idea basicaly was to try and minimise the amount of components used in makng an item of furniture, and this design seemed to fit that bill. The draw unit is made out of one piece of OSB board with minimal wastage due to the fact that all of the off cuts are used to make the draw runners. These draw runners work by slotting into the main frame of the draw unit and hence the draws simply slide in and out of these slots and this creates a very minimalist but effective draw runner system.

To add to the minimalist feel the draw handles are replaced with cut out holes and the finish piece is varnished to seal the OSB board. Also with this design i wanted to highlight sustainability as its main selling point, and this is achieved in many ways, from the soya based glue down to the FSC certified board for the construction. i wanted the draw unit to be as cost effective as possible with minimal waste but also not lose any design flair or originality and i think this is achieved. when constructing this it was paramount that an effective cutting list was drawn up to maximise the board being used and reduce wastage to a bare minimum.


This design also leads onto other items of furniture with the same cost cutting features and sustainable elements (these are currently being designed amd will appear soon) including a sideboard and possibly a wardrobe.
  construction of this piece was difficult as it was the first major piece of furniture i had made but i learnt from its construction and it still performs as intended. Another feature of this design is that it can be made high end and more emphasis put on the innovate runner system. But i didnt want to make another chest of drawers but make something different with minimal impact on resources. i also tried to make the framework with the least amount of elements to add to the overall idea of being cheap, low impact and concious. But to be honest there are areas that could be slimmed down even more but these will show through on the new items to accompany this design. but even slimmed down, the framework is extremely strong, coupled with the OSB board produces an extremely stable item of furniture.

Care had to be taken when cutting and fixing the runner system as this would determine how far the draws opened. So alot of trial and error was conducted to see how far the draws needed to open and how far they could be opened before the unit became unstable and/or the draws fell out. In conclusion a very simple idea and a staple of classic furniture design, but a design that is different in many ways and a design that also inspires other ideas and sustainable practices.

12 comments:

  1. Nice idea, I like it.

    One minor issue mate. It's drawer not draw.

    ReplyDelete
  2. i love this idea. very adaptable. I see a whole system.

    ReplyDelete
  3. I LOVE this! Such a cool design!! Going to try and make one myself!

    ReplyDelete
  4. This is terrible. Just because you can imagine something doesn't make it a good idea. This is not a good idea - it' a terrible one.

    ReplyDelete
    Replies
    1. Any constructive statements or explanations??!

      Delete
    2. I agree. It would be interesting to know why unknown thinks this is terrible. I'm okay with sound reasoning.

      Delete
  5. I love this! This is something I can do! Thanks for the fantastic idea!

    ReplyDelete
  6. Aside from the fact that it is really ugly, I would worry about the rigidity of the side panels. If there is sag because of weight on the top, they would pinch the drawer slide opening. Even a thin veneer panel to hide the chipboard would resolve the problem, but it would no longer be the "low impact" design he is trying for.

    ReplyDelete
  7. Thinking along the same lines, what if the slide was taken out of the side of the drawer and glued to the inside of the side panel. The resulting unit would be stronger, the slides would be invisible and the unit could be painted and decorated much more easily, and you wouldn't have the limitation on how far you can pull out the drawer. Construction would be easier (sawing out that slot can't be simple and easy) and you're still not using any extra material.

    ReplyDelete
  8. OSB is not low impact to start with, and put any mildly heavy on the top and the drawers will not open.
    And who would want that boards off gassing next to your bed.

    ReplyDelete